1. Forums
  2. EZdrummer Line
  3. EZdrummer Help
  4. Pro Tools & EZdrummer 2 & 3

Pro Tools & EZdrummer 2 & 3

EZdrummer Help
Viewing 5 replies - 1 through 5 (of 5 total)
  • Replied December 12, 2023 at 17:02 #3185717
    John
    Moderator

    Hi,

    the discontinued EZdrummer 2 is not Apple Silicon Native, so it will only function if Pro Tools is started in Rosetta mode.

    If you insert EZdrummer 3 on an Instrument Track where EZdrummer 2 was previously inserted, you need to enable the Instruments view in the Pro Tools Mixer so you may set the MIDI Output (at the very top of the mixer channel in PT) of the Instrument Track to EZdrummer 3 instead.

    When copying MIDI from one track to another, I tend to just Cmd+A on the source track the Copy, then ‘p’ and/or ‘;’ to move the selection up or down to the destination track before Pasting. That way I can be sure there is no manual error when pasting, causing the timing to be different.
    Also, if you have RealTime Properties (such as e.g. Quantize) Enabled on the Source Track, copying MIDI will not automatically Enable those Real-Time Properties on the destination track.

    BR,
    John

    John Rammelt - Toontrack
    Technical Advisor

    1

    Thanked by: Brad
    Replied December 15, 2023 at 03:49 #3188611
    Artfuldodger
    Participant

    I tried what you said.

    I created a complete duplicate copy of my sesssion/project in Pro Tools.

    I used Rosetta to open the original old one with EZ Drummer 2.

    The original version sounds great. The drums sound great. There are no eq, delay or another plugins on the EZ Drummer 2 track on the original.

    I opened the duplicate session/project and created a complete new stereo instrument track with EZ Drummer 3.

    I copied the midi from the EZ Drummer 2 track to the EZ Drummer 3 Instrument track.

    This track does not have any other plugins on it either.

    Don’t know what is different but the drums don’t sound like the original and definitely don’t sound good.

    One more thing, the version of the session/project with EZ Drummer 3 track is Apple Silicon with Sonoma, not running Rosetta.

    Jim


    EZdrummer version: 3.0.6
    Operating system: macOS Sonoma (14)
    • This post was modified 1 year, 7 months ago by Artfuldodger.
    Replied December 15, 2023 at 06:29 #3188670
    Brad
    Participant
    Artfuldodger wrote:

    I tried what you said.

    I created a complete duplicate copy of my sesssion/project in Pro Tools.

    I used Rosetta to open the original old one with EZ Drummer 2.

    The original version sounds great. The drums sound great. There are no eq, delay or another plugins on the EZ Drummer 2 track on the original.

    I opened the duplicate session/project and created a complete new stereo instrument track with EZ Drummer 3.

    I copied the midi from the EZ Drummer 2 track to the EZ Drummer 3 Instrument track.

    This track does not have any other plugins on it either.

    Don’t know what is different but the drums don’t sound like the original and definitely don’t sound good.

    One more thing, the version of the session/project with EZ Drummer 3 track is Apple Silicon with Sonoma, not running Rosetta.

    Jim

    EZdrummer version: 3.0.6
    Operating system: macOS Sonoma (14)

    • This post was modified 1 year, 7 months ago by Artfuldodger.

    Are you using the same preset and kit that you used in the original PT session?


    EZdrummer version: 3.0.6
    Operating system: macOS Sonoma (14)

    Mac Studio M1 Max, RAM 64 GB, 1TB Drive, OSX 12.x/13.x and Windows 10 (VM)
    DAW: Studio One Pro (always up to date)
    DTX Express III (Extreme triggers), Nektar LX88
    OWC Thunderbay Mini (4 X 1TB Sata SSD), Express 4M2 (4 X 2TB M.2 SSD), Envoy Express (1TB M.2 SSD)
    Presonus Quantum, Faderport & Faderport 8
    Black Lion Sparrow Mk2 A/D, FMR-RNP-RNC, MIDI Xpress 128, BM5A, KRK VXT4, Equator D5
    2020 Macbook Pro 16GB RAM, 512GB SSD Audio(mobile rig)

    Replied December 16, 2023 at 01:44 #3189526
    Artfuldodger
    Participant

    Well, the kit was different.

    So I change it to Modern Basic.

    It is much closer, but still feels like something missing dynamically.

    Replied December 16, 2023 at 14:14 #3189795
    John
    Moderator

    I suggest you open the session in Rosetta mode and create a duplicate track with EZdrummer 3 where you check all settings in the plug-in on the EZdrummer 2 track and mimic them on the EZdrummer 3 track.

    BR,
    John

    John Rammelt - Toontrack
    Technical Advisor

  • Author
    Replies
Viewing 5 replies - 1 through 5 (of 5 total)

No products in the cart.

×
menu
Play / pause
0:00
0:00
    volume
    ×