Topic: Linking SD3 with Roland TD-07

Viewing 5 replies - 1 through 5 (of 5 total)

Replied February 9, 2023 at 02:28 #3051715

Tyler.en
Participant

I figured out the latency issue by lowering the sample rate. However, I’m still a bit unsatisfied with the ghost note volume I get. Even when I stroke them as quietly as possible they seem to be much louder than they should be.

Replied February 9, 2023 at 07:31 #3051761

Brad
Participant

Tyler.en wrote:

I figured out the latency issue by lowering the sample rate. However, I’m still a bit unsatisfied with the ghost note volume I get. Even when I stroke them as quietly as possible they seem to be much louder than they should be.

Have you tried recording MIDI to see what velocity your snare drum is sending for ghost notes?

You may need to adjust the velocity curve for the particular trigger/drum.

https://youtu.be/q1eBpZgmWg0

Superior Drummer 3 version: 3.3.5
Operating system: macOS Ventura (13)
Mac Studio M1 Max, RAM 64 GB, 1TB Drive, OSX 12.x/13.x and Windows 10 (VM)
DAW: Studio One Pro (always up to date)
DTX Express III (Extreme triggers), Nektar LX88
OWC Thunderbay Mini (4 X 1TB Sata SSD), Express 4M2 (4 X 2TB M.2 SSD), Envoy Express (1TB M.2 SSD)
Presonus Quantum, Faderport & Faderport 8
Black Lion Sparrow Mk2 A/D, FMR-RNP-RNC, MIDI Xpress 128, BM5A, KRK VXT4, Equator D5
2020 Macbook Pro 16GB RAM, 512GB SSD Audio(mobile rig)

Replied February 9, 2023 at 08:57 #3051769

Mark King
Participant

SD3 will respond to the midi velocity you send it. If you have the sensitivity on your module too high then that will do it. As above record the notes and see what value they are. If you mean the 25/30 is the velocity then it’s what you are sending.

Another big thing is what kit are you triggering? If it’s a preset it may have lots of effects and compression so the ghost notes will be louder. Try one of the unprocessed kits and check there are no effects.

The drum type presets on the edrum page are a starting point. I have a td30 and did a lot of changes especially with expanding the kit. The presets get you going. The rest is down to you.

As you found out you have to lower the buffers to get better latency. You are also better off using a decent low latency audio interface if you are using the module or computer audio as the audio interface.

SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors

Replied February 9, 2023 at 13:38 #3051836

drumjack52
Participant

Tyler.en wrote:

I figured out the latency issue by lowering the sample rate. However, I’m still a bit unsatisfied with the ghost note volume I get. Even when I stroke them as quietly as possible they seem to be much louder than they should be.

Sample rate and latency really have nothing to do with each other.

Superior Drummer 3 version: 3.3.5
Operating system: macOS High Sierra (10.13)
Jack
aka musicman691 on other forums
Superior Drummer 3.4.0
Area 33 1.0.0
Death and Darkness 1.0.1
PT 2021.6
OSX 10.13.6
3.46 GHz hex core 2012 MacPro 48 gig ram

Replied February 9, 2023 at 16:05 #3051876

Mark King
Participant

Most buffer sizes are measured in samples but not sample rate which is a different thing.

SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors
Author

Replies

Viewing 5 replies - 1 through 5 (of 5 total)

Linking SD3 with Roland TD-07

Superior Drummer 3 Help

Viewing 5 replies - 1 through 5 (of 5 total)