Topic: hi hat not working correctly with latest update

Viewing 10 replies - 1 through 10 (of 10 total)

Replied November 6, 2020 at 14:01 #2640155

kenny.fowler
Participant

TD-27 user here (vh-10 hihat). Did you check which velocity values coming into SD3 for hihat cc? Most obvious reason could be the cc max value is set to 90 in the TD-27, which is the default value for the vh-10. In that case just do the hihat calibration in SD3.

Superior Drummer 3 version: 3.2.3
Operating system: Windows 10

1
Thanked by: kachaloo
Replied November 14, 2020 at 02:27 #2643640

kachaloo
Participant

I have done the calibration and Superior Drummer reports the cc max value as 90. Even after saving this the problem persists.
Replied November 14, 2020 at 12:19 #2643751

Mark King
Participant

I think you need to change on the td27. It will make life easier

SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors

1
Thanked by: kachaloo
Replied November 15, 2020 at 21:45 #2644445

kenny.fowler
Participant

kachaloo wrote:

I have done the calibration and Superior Drummer reports the cc max value as 90. Even after saving this the problem persists.

hmm thats odd its still not working… its true, SD3 receives only 90 as max value, thats why you need to hit the calibration button in the hihat settings of SD3, you then need open and close the hihat one time and SD3 will then remap the 0-90 range to 0-127.

But yes, you can also switch the range in the TD-27 module to 127, its under trigger > hihat (my experience is that leaving the range a 0-90 works a little bit smoother with a calibrated SD3)

Superior Drummer 3 version: 3.2.3
Operating system: Windows 10

2
Thanked by: adam4585 and kachaloo

Replied November 16, 2020 at 03:38 #2644536

kachaloo
Participant

Changing the cc max in the td27 from 90 to 127 resolved the issue. Thanks!

Replied November 18, 2020 at 04:39 #2645324

kachaloo
Participant

It seems a new problem has popped up. The hi-hat will work correctly when played by itself but as soon as I add in another drum or play the whole kit it starts (at seemingly random but I’m not sure) to register hits at different degrees of open, despite being fully closed and the TD27 reporting it as such in the hi-hat trigger menu. However, the hi-hat control graphic in SD3 has it erratically moving up and down from the closed position at 127. Any help would be appreciated.

This post was modified 4 years, 7 months ago by kachaloo.

Replied November 18, 2020 at 09:45 #2645368

Mark King
Participant

All I can think is cross talk. Maybe you are putting pressure on the pedal while playing other pads?

SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors

Replied November 19, 2020 at 01:21 #2645681

kachaloo
Participant

Not sure what it was but just re-set everything in reaper and works fine . . . for now . . . thanks for the replies, much appreciated.

Replied May 19, 2021 at 22:07 #2753330

Gerdrums
Participant

Meine Hi-Hat VH-10 von Roland funktioniert nicht mit dem SD 3. Ich habe ein Roland TD-50 Soundmodul. Welche Schritte muss ich von Anfang an voll ziehen, damit die Pedalfunktion richtig ist, im offenen und im geschlossenen Zustand?

Superior Drummer 3 version: 3.2.4
Operating system: Windows 10
This post was modified 4 years, 1 month ago by Gerdrums.

Replied May 25, 2021 at 12:50 #2754764

MintberryCrunch
Participant

Gerdrums wrote:

Meine Hi-Hat VH-10 von Roland funktioniert nicht mit dem SD 3. Ich habe ein Roland TD-50 Soundmodul. Welche Schritte muss ich von Anfang an voll ziehen, damit die Pedalfunktion richtig ist, im offenen und im geschlossenen Zustand?

Hallo Gerd, hier ein Tipp: check meine FB Forum-Gruppe für vollen SoftwareDrumming-Support (auch auf deutsch).

The Software Drumming Forum - tips & tricks + discussing drum samplers
Author

Replies

Viewing 10 replies - 1 through 10 (of 10 total)

hi hat not working correctly with latest update

Superior Drummer 3 Help

Viewing 10 replies - 1 through 10 (of 10 total)