Topic: [Traktion] Setting up EZplayer

Viewing 7 replies - 1 through 7 (of 7 total)

Replied July 5, 2008 at 23:35 #1922096

John
Moderator

Hi,

if you construct something with EZplayer Pro in your DAW, this should be saved with your Song/Project, giving you full access to what you have created at a later occasion.
You can also export what you have composed in EZplayer Pro by lassoing the parts in the Arranger and drag-and-drop back to the EZplayer Pro browser.
This MIDI file can be imported into your DAW or put on an EZplayer Pro.

Best Regards,
John

John Rammelt - Toontrack
Technical Advisor

Replied July 6, 2008 at 01:33 #1922097

gearjunkie13
Participant

OK ,I got the ez player arranger to work drag and drop into the btrowser,that was easy enough,thank you. I have open ezplayer in my tracktion 3 drop down box(filters) I can drag the constructed drum part from the ez player browser into an available track,but when I drop it into one of the tracktion tracks,it appears to be on the track,I just can’t hear it playing ?? When I use ez drummer from the same filters menu in tracktion it loads up and works perfect.

Replied July 7, 2008 at 13:46 #1922105

Rogue
Moderator

Is your bridge set up properly? in other words can you hear anything coming out of EZdrummer when playing grooves from EZplayer? If not that’s your problem.

Or perhaps you are dragging to the wrong track. You should drag to the track assigned to YFDS (EZdrummer).

Rogue Marechal - Toontrack
Configuration Manager

Replied July 7, 2008 at 16:07 #1922110

gearjunkie13
Participant

Rogue,

Thank you for the help.The problem was I had to drag the ezplayer saved midi track from the browser onto the ez drummer track.Also in tracktion 3 you have to make sure that the ez drummer filter comes before the ezplayer filter on the track you are creating on. So both ezplayer and ez drummer have to be opened in tracktion 3. Cool !!

Replied July 7, 2008 at 17:15 #1922112

Rogue
Moderator

hum, if you create a single stack yes but you can and probably would want to set them on different tracks. Otherwise I would expect no preview possible before drag and drop… I’m not a Traktion expert however.

Rogue Marechal - Toontrack
Configuration Manager

Replied July 7, 2008 at 17:55 #1922114

Rogue
Moderator

Ok, I checked Traktion a minute ago and routing is a breeze (at least to drive a single instance of YFDS) so here is the official walkthrough that will be included in an upcoming manual:

C- Setting up Mackie Traktion

EZplayer requires Traktion version 2 or later (previous versions do not support key
functionality necessary for operations).

Before you start, you should make sure that you are familiar with how to operate
Virtual Instruments in your host and that you have a copy of YFDS (Your Favourite
Drum Sampler) configured for Audio and MIDI playback.

1) Inserting the plugin:

• insert EZplayer as a filter on a new track

2) Setting up:

• Insert YFDS as a new filter on a separate track
• Select the EZplayer track and change its properties so the destination output is the track where you inserted YFDS
• In EZplayer, choose the appropriate MIDI Output format for YFDS
• Select a groove in EZplayer and press Play

3) Building a drum track:

• Once you have found the right groove, simply drag and drop the MIDI file to the
MIDI track with YFDS in your Arrangement.
• Add additional grooves from EZplayer to create your new drum track.

Take care!
RM

Rogue Marechal - Toontrack
Configuration Manager

Replied July 8, 2008 at 12:06 #1922122

gearjunkie13
Participant

Thanks again Rogue!
I tried what you suggested and it worked perfectly.
Author

Replies

Viewing 7 replies - 1 through 7 (of 7 total)

[Traktion] Setting up EZplayer

EZplayer Help

Viewing 7 replies - 1 through 7 (of 7 total)