EZDrummer 2 and DTXtreme III

EZdrummer Pre-sales
Viewing 11 replies - 1 through 11 (of 11 total)
  • John
    Moderator

    Hi,

    if your Yamaha module is set to Yamaha standard, it is a matter of plugging the USB cable in, starting EZdrummer 2 and selecting the Yamaha E-drum MIDI Preset.

    John Rammelt - Toontrack
    Technical Advisor

    wphall
    Participant

    Very good. Wanted to make certain and thank you!

    2015 MacBook Pro: 16/512ssd, EZ2, SD2, SD3

    Greg
    Participant

    This is exactly what I use. Have fun!

    Intel 13900K, Windows 11 , Cubase Pro 13.0.30, Studio One 6.2.1.64495, 64GB RAM, UA Apollo x4 and UA Apollo X8 Thunderbolt,, 64 sample buffer size, Radeon 570, 42″ 4k monitor

    MIDI controller: Roland A-37, Jamstik Studio, MCU Pro + expander
    Drum Brain: Yamaha DTX 900, RHH135 hihat, 2 crash and 1 ride cymbal, 4 toms.

    wphall
    Participant

    Glad to read others are using this setup.

    I haven’t been able to get it to work yet. Installed EZD2, selected Yamaha under eDrums midi, and the module isn’t triggering the software. I installed Yamaha’s driver for OS X and plugged the DTX900 into the mac via USB.

    Any tips? Thx!

    2015 MacBook Pro: 16/512ssd, EZ2, SD2, SD3

    John
    Moderator

    In Settings > Audio/MIDI Setup, did you put a check mark in the box for your MIDI Device?

    John Rammelt - Toontrack
    Technical Advisor

    wphall
    Participant

    Howdy- Thanks for the tip. Tried that with no luck. Will to try and reset the module and see what happens. Will report back later today.

    Thx!

    2015 MacBook Pro: 16/512ssd, EZ2, SD2, SD3

    wphall
    Participant

    Yes! Got it to work. I had to go into the DTX module and select USB as the MIDI port out.

    Everything works except that toms 1 and 2 on my DTX are both triggering tom 2 in ezdrummer. I’ll have to figure out how to map everything correctly.

    This is awesome! Can’t wait to start playing!

    Thanks for the help!

    2015 MacBook Pro: 16/512ssd, EZ2, SD2, SD3

    John
    Moderator

    Check that your module sends note #48 (alternatively #81) on Tom 1.
    Don’t think the 5 Toms in EZdrummer 2 are Yamaha standard, IIRC but changing that note should trigger the 1st.

    John Rammelt - Toontrack
    Technical Advisor

    wphall
    Participant

    Thanks for the help. It took remapping the keys on a few of the toms within the DTX900. All mapped out and working great.

    Thx again! Great forum.

    2015 MacBook Pro: 16/512ssd, EZ2, SD2, SD3

    wphall
    Participant

    Wow! I now have everything working. Once I figured out the mapping, it works like magic. The EZDrummer samples are fantastic. This has opened up an entirely new world for me as an eDrummer. Very excited!

    Great product.

    2015 MacBook Pro: 16/512ssd, EZ2, SD2, SD3

    John
    Moderator

    Great!??

    John Rammelt - Toontrack
    Technical Advisor

Viewing 11 replies - 1 through 11 (of 11 total)

Please log in to read and reply to this topic.

No products in the cart.

×