icon-toontrack-20tt-20-symbolicon-aiicon-arrangementsicon-arrow-left-1icon-arrow-left-2icon-arrow-left-3icon-arrow-right-1icon-arrow-right-2icon-arrow-right-3icon-automationicon-bleedicon-bounceicon-brushesicon-brushes2icon-campaign-pageicon-circlesicon-cloudCommentsicon-cross-invicon-crossicon-cymbalicon-dislike-1icon-dislike-2Unread topicicon-downloaddrumsicon-drag-dropicon-drumkiticon-drums2icon-drumsticksicon-edrumsicon-electronicTopicicon-envelopeicon-fadersicon-faqForumForumTopic replyicon-futurehiticon-galaxyicon-grid-editoricon-headphonesicon-hihaticon-hot-topicicon-importsamplesicon-information-invicon-informationicon-joystickicon-kickicon-like-1icon-like-2Locked topicicon-macrosicon-massenburgAccountCartSearchicon-microphoneicon-midi-exporticon-midi-searchicon-midi-trackericon-midi-tracksicon-midiicon-mix-channelsicon-mixericon-news-inspirationicon-one-noteicon-percussionicon-percussion2Sticky topicicon-play-1-invicon-play-1icon-play-2-invicon-play-2icon-play-3icon-plus-invicon-plusicon-presetsPrivate topicicon-rawicon-reverseanythingicon-samplesicon-save-drumicon-seamlessicon-settingsicon-shapesicon-snareicon-song-tracksicon-ssdicon-stackicon-tap2findicon-tempoicon-third-partyicon-three-notesicon-tomTopic with best answericon-two-notesicon-usericon-videoicon-workflow

CUSTOMIZING THE ENVELOPE FOR THE TEMPO.

Think that the giant 28” Ludwig in the Superior Drummer core library kick can’t be used in anything but a ballad tempo? Think again. With the Envelope and Offset Property box, you can easily tame the long resonance of big kick drums and toms to fit in a variety of different tempos.

The attached project file includes a groove played back at 155 BPM with the Ludwig Concert kit selected including the 14×28” Ludwig kick. Normally, a kick drum this large and resonant would only be used for slower tempos, because at faster tempos its resonance builds up and takes over the mix. However, with the Envelope property box, it’s possible to tailor the kick drum’s resonance (and all instruments for that matter) in a way that a gate never could.

I’ve set up a somewhat extreme example for the purposes of this article (and downloadable project file), but these techniques can be used more sparingly for any kit and any tempo in which you may be working.

The first step to dialing in the Release Anchor point for the kick is to select the drum and then turn on the Envelope and Offset property box.

Next, I like to solo the kick with the level Property box so that I can hear the instrument through every single channel in which its present.

Then play the groove on the Song Track and start adjusting the Release Anchor point in the Envelope and Offset property box to your liking. In this case, I’m listening for the kick drum to have almost completely faded out before the start of the next hit.

In this example, the groove on the Song Track is playing 1/4 notes on the kick drum. At a tempo of 155, a quarter note is 387ms long. Therefore this is a good starting point, but adjusting to the exact value often sounds too artificial… So, I’ll push the release to 460 ms.

If needed, you can make further adjustments to the slope of the fade out by clicking on the Curve Slope Anchor Point. In this example I’ve reduced the slope of the kick drum only.

For all other shells in the kit, I have shortened them to the length of a half note at 155 BPM (774 ms) as they do not have quick repeating hits, and therefore do not need to be as dampened. To do this, I shift clicked the snare and all of the toms for a multi selection, then selected the Release anchor point, and finally entered the value of 774 ms.

To hear this effect in action, simply open the attached project file, shift-click the kick, snare, and toms and then play the groove. With all of the shells selected, turn off the Envelope and Offset property box. You will then hear the undesired buildup of resonance take over the drum sound.

Using the Envelope release control specifically for the tempo of your track is an extremely valuable skill that can really clean up your drum mix!

Happy mixing!

DOWNLOAD PROJECT FILE

Mike Sanfillipp


GUEST PLAYLIST: MARK LEWIS.

Producer/engineer/mixer mark Lewis shares his current top ten!

THE ROCK FOUNDRY SDX VIDEOS.

Two new videos showcasing the seven kits and a selection of presets found in The Rock Foundry SDX.

CUSTOMER JUKEBOX EXPO.

Listen to all FIVE Customer Jukebox compilations!

CUSTOMER PROFILE: NOVEMBER-7.

Rock/industrial/metal mix from Switzerland.

METAL MONTH CUSTOMER JUKEBOX – WEEK 5.

Listen to the fifth and final Customer Jukebox for this year’s edition of Metal Month.

METAL MONTH PRODUCT ROUNDUP.

Here’s a a roundup of all our releases for Metal Month 2017.

THE ROCK FOUNDRY E-DRUM PERFORMANCE.

The always awesome Luke Oswald gives The Rock Foundry SDX a test run on his e-kit.

DRUMCEPTION DRUM PLAYTHROUGH.

Megadeth drummer Dirk Verbeuren in a playthrough of his 2017 Drumception track.

GUEST PLAYLIST: DOC COYLE.

Here’s what Bad Wolves guitarist listens to right now.

PRODUCER PROFILE: WILL PUTNEY.

Meet Toontrack Producer Will Putney!

NEW RELEASE: POWER METAL MIDI.

The fundamentals of power metal!

AUDIO DEMO MIXED BY BOB ROCK.

Check out this awesome track by Roché, now remixed by Bob Rock and Adam Greenholtz – using The Rock Foundry SDX.

×