PFozz I just edited my previous post (“around” was confusing and I replaced it by “before or after”) 😉
The comment about R2 isn’t wrong. Actually, you can reduce the “rim sensitivity” by decreasing the R2 value, but you must keep R2 above a minimum value. That’s why you may change R2 for a 100K resistor and add a pot before or after R2 but you can’t simply replace R2 by a pot. R2 won’t be less than 100k with a 1M pot and a 100k resistor in serial connection.
Adding a pot between the Aux Piezo (+) and R1 will have the same effect (it will reduce the “rim sensitivity”).
About the sensitivity of your main piezo… Yes, a pot between this piezo (+) and your module will reduce the sensitivity (and the tiny pot present on most Yamaha rubber pads provides this functionality, btw).
www.eareckon.com
No products in the cart.
Get all the latest on new releases,
updates and offers directly to your inbox.
Note: By clicking the 'I WANT IN' button, you will not be creating a Toontrack user account. You will only sign up to get our newsletters, offers and promotions to your inbox. You can unsubscribe at any time from a link at the bottom of each email. If you want to learn more about our privacy policy, please find detailed information here.
