Re: [DESIGN] DIY Mesh Heads for heavy handed drummers (by Xan)

[bgibson72]

Hello–I’ve made my own heads from old broken heads.  I used the rim only, and window/door screen fabric from a local big box home store in a double layer with the fibers running at 45 degree angles from each other.  I’ve not tried using the “pet proof” fabric, but it may be a wise choice for you heavy hitters due to the increased thickness and durability.  Cutting the screen about 2 inches larger than the hoop, I wrapped the excess over the hoop and then stitched around (loop stitch) the rim with a heavy weight thread (nylon fishing line or similar will do)  Be careful to pull it tight as you work, but loose enough to give when tightened around the drum.  For extra insurance, I used some gaffer tape around the rim in case I lost a stitch or two tightening the drum or when played.  Works a treat!