EzDrummer 2 + RME HDSPe Madi FX crash

Requests and Feedback
Viewing 15 replies - 1 through 15 (of 17 total)
  • Scott Eshleman
    Participant

    with what OS, RAM, HDD are you using the RME HDSPe Madi FX and EZDrummer2?
    is the RME HDSPe Madi FX installed internally or in a connected external interface?

    Alan Igneous
    Participant

    @gseshleman said:

    with what OS, RAM, HDD are you using the RME HDSPe Madi FX and EZDrummer2?
    is the RME HDSPe Madi FX installed internally or in a connected external interface?

    OS == Win 7 Pro x 64
    RAM == 32 GIG
    OS installed on SSD drive
    EzDrummer 2 installed on 2nd SSD drive
    RME HDSPe Madi FX is installed internally and solid as rock.

    By the way, EzDrummer 2 is working fine in Cubase 7.5 as a VST plugin in conjunction with Madi FX – perfectly.
    Problem ONLY occurs using ExDrummer in stand-alone mode – setting the output channels as indication in my original post.

    Hope this helps :)

    Scott
    Moderator

    What version number shows on the EZD 2 interface in both standalone and in Cubase?

    Scott Sibley - Toontrack
    Technical Advisor

    Alan Igneous
    Participant

    @Scott said:

    What version number shows on the EZD 2 interface in both standalone and in Cubase?

    EZdrummer plug-in version 2.1.0 (build 10421) [64-bit VST]
    Standalone host version 2.1.0 (build 10421)

    SOUND LIBRARIES
    EZdrummer 2 Modern version 1.0.2
    EZdrummer 2 Vintage version 1.0.2
    Jazz version 1.5.1
    Pop/Rock version 1.5.2

    MIDI LIBRARIES
    EZdrummer 1 Pop/Rock version 1.5.0
    EZdrummer 2 Modern/Vintage version 1.0.0
    EZdrummer 2 Percussion version 1.0.0
    EZX Jazz version 1.3.5

    ///////////////////////////////////////

    Alan Igneous
    Participant

    PS I just figured out I can get around the problem easy enough by selecting a low numbered audio output channel
    (in stand-alone mode) & route the software audio output wherever I like using RME Total Mix FX.

    Therefore, it’s no longer a “show stopper” …
    Nevertheless, using a high numbered output (i.e. phones) in stand-alone “out channel” does cause EzDrummer 2 to crash …

    Alan Igneous
    Participant

    Has anyone at Toontrack been able to verify this problem yet?

    Alan Igneous
    Participant

    Is anyone looking into this issue of EzDrummer 2 crashing as described in my original post?

    John
    Moderator

    Hi,

    did you update to version 2.1.1?
    If you select ‘Check for updates’ in the Menu, are you prompted to update anything? If so, please do.

    John Rammelt - Toontrack
    Technical Advisor

    Alan Igneous
    Participant

    @John said:

    Hi,

    did you update to version 2.1.1?
    If you select ‘Check for updates’ in the Menu, are you prompted to update anything? If so, please do.

    I’ve updated to version 2.1.1 but the original problem of Ezdrummer 2 crashing when I select “phones 1 + 2” using
    my RME Madi FX card as audio output still persists.

    John
    Moderator

    OK,

    the programming team is aware of your issue but there is no ETA

    John Rammelt - Toontrack
    Technical Advisor

    Alan Igneous
    Participant

    @John said:

    OK,

    the programming team is aware of your issue but there is no ETA

    Hello again,

    It has been over 9 months since I reported this problem and I wondering if this bug in EzDrummer is going to be fixed soon?

    Extra info:
    1. The channels 1-32 work. Above that EzDrummer crashes.
    2. Each time I instantiate EzDrummer stand-alone, the audio signal is present on channels 1 & 2 in addition to the assigned “Output (L)1
    & Output (R)2 channels. NB “multi-0ut” is unchecked. If I reassign “Output (L)1 & Output (R)2 channels then the erroneous signal is removed channels 1 & 2.

    Here is version information as reported in the “about box”:
    :
    EZdrummer plug-in version 2.1.1 (build 10513) [64-bit VST]
    Standalone host version 2.1.1 (build 10513)

    SOUND LIBRARIES
    EZdrummer 2 Modern version 1.0.2
    EZdrummer 2 Vintage version 1.0.2
    Jazz version 1.5.1
    Pop/Rock version 1.5.2

    MIDI LIBRARIES
    EZdrummer 1 Pop/Rock version 1.5.0
    EZdrummer 2 Modern/Vintage version 1.0.0
    EZdrummer 2 Percussion version 1.0.0
    EZX Jazz version 1.5.0
    N.Y – Avatar version 1.2.0

    John
    Moderator

    Hi,

    still no ETA. AFAIK, the problem is identified, rectified and waiting to be included in the next update release.

    John Rammelt - Toontrack
    Technical Advisor

    Alan Igneous
    Participant

    @John said:

    Hi,

    still no ETA. AFAIK, the problem is identified, rectified and waiting to be included in the next update release.

    Thanks John
    hopefully the next update release isn’t too far away.
    Rob

    Alan Igneous
    Participant

    @John said:

    Hi,

    still no ETA. AFAIK, the problem is identified, rectified and waiting to be included in the next update release.

    Hello again,
    It has been over 13 months since I reported this problem and I wondering if this bug in EzDrummer is going to be fixed???

    John
    Moderator

    Hi,

    I can confirm that the bug was identified and fixed and it is going to be included in the next update release.
    I’m sorry but I cannot be more specific than that.

    John Rammelt - Toontrack
    Technical Advisor

Viewing 15 replies - 1 through 15 (of 17 total)

Please log in to read and reply to this topic.

No products in the cart.

×