I have a pretty regular stock standard Alesis DM10X kit. Kick, Snare, 4 toms etc..
But I also have an Alesis Sample Rack Pro.. For that I have built 2 multi pads. 6 pads on each for a total of 12 pads. I have the Sample Rack midi'd into the DM10 module, so the DM10 sends its own midi plus the midi notes from the sample rack.
From what I've seen in videos and online there is no kit in SD3 that matches my setup..
When I get SD3 will I be able to create my custom kit. Assign sounds to whatever midi notes I like? Or would I be limited by the pretty graphics of the kits that are nothing like my kit?
EDIT: Ok this can be disregarded. I read the manual (funny how that helps), and saw you can Add Instruments. Not sure how it will work in practice to add 12 instruments to each kit, But it does look promising.
As you noticed - you can use the current instrument positions in the library you have loaded, or add as many extra instruments as you'd like (well, there is a limit of 127, but it should be enough) 🙂
You can also change all the MIDI notes on all of the instruments. You should do this in Settings / MIDI In/E-drums, where you can do the MIDI mapping, adjust velocity responses etc. and then save a preset for each kit/hardware controller you'd like.
You can also change the internal MIDI notes (in the Drums tab), but that's not advised since the mapping will only be used for the preset you are working on, and the Toontrack MIDI files won't sound as intended...
Most Users Ever Online: 715
Currently Online: Olle, Brian, Brad, Michael, xname, Cris1808Araujo
Currently Browsing this Page: